CAD modeling and interface stress analysis of diamond-coated tooling

Show simple item record

dc.contributor Parker, Joey K.
dc.contributor Fonseca, Daniel J.
dc.contributor Wang, Jialai
dc.contributor.advisor Chou, Y. Kevin
dc.contributor.author Miao, Chao
dc.date.accessioned 2017-03-01T14:36:10Z
dc.date.available 2017-03-01T14:36:10Z
dc.date.issued 2010
dc.identifier.other u0015_0000001_0000387
dc.identifier.other Miao_alatus_0004M_10494
dc.identifier.uri https://ir.ua.edu/handle/123456789/893
dc.description Electronic Thesis or Dissertation
dc.description.abstract Diamond-coated cutting tools have been widely employed in machining applications due to their superior properties. However, during the deposition process, significant residual stresses will be generated to affect the coating-substrate adhesion quality. In addition, interface delamination is another major factor causing catastrophic tool failure. The objectives of this research consist of: (1) to evaluate deposition-induced residual stresses of diamond-coated drills, (2) to analyze the interface failure of diamond-coated tools by numerical simulations of indentations, and (3) to evaluate deposition-induced residual stresses developed on diamond-coated macro/micro end mills with the inclusion of a cohesive zone model. The research scopes of this research are to investigate diamond-coated tool residual stresses as well as interface behaviors under the contact loading. The research methodologies include: (1) 3D CAD modeling of diamond coated drills and macro/micro end mills, (2) finite element analysis (FEA) of diamond-coated cutting tools after the deposition, and (3) indentation based simulations incorporating a cohesive zone model for the analysis of interface behaviors. The major findings were summarized as follows: (1) for diamond-coated drills, FEA results indicated that the edge radius had the most dominant effect on interface stresses, which were 1.41 GPa, 3.11 GPa for 3 µm re and 0.73 GPa, 2.94 GPa for 15 µm re in terms of σ_rmax and σ_θmax, (2) for the indentation with a spherical indenter, increasing the coating Young's Modulus reduced delamination sizes, and a thicker coating tended to have greater resistance to the interface delamination. Residual stresses facilitated the interface delamination. For the indentation with a wedge indenter, substrate surface curvature slightly affected the loading vs. displacement curve. Residual stresses increased delamination sizes. The coating with a larger Young's Modulus had less delamination sizes, and (3) as for diamond-coated end mills, the edge radius still dominantly affected residual stresses. When the size of macro end mills was scaled down to micro level, interface stresses were increased. The existence of a CZM reduced residual stresses. The major achievements included (1) diamond-coated tool geometry and cohesive zone effects on residual stresses and interface stresses, and (2) coating attribute, residual stresses, and substrate surface curvature effects on the interface behavior.
dc.format.extent 130 p.
dc.format.medium electronic
dc.format.mimetype application/pdf
dc.language English
dc.language.iso en_US
dc.publisher University of Alabama Libraries
dc.relation.ispartof The University of Alabama Electronic Theses and Dissertations
dc.relation.ispartof The University of Alabama Libraries Digital Collections
dc.relation.hasversion born digital
dc.rights All rights reserved by the author unless otherwise indicated.
dc.subject.other Engineering, Mechanical
dc.title CAD modeling and interface stress analysis of diamond-coated tooling
dc.type thesis
dc.type text
etdms.degree.department University of Alabama. Dept. of Mechanical Engineering
etdms.degree.discipline Mechanical Engineering
etdms.degree.grantor The University of Alabama
etdms.degree.level master's
etdms.degree.name M.S.


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Browse

My Account