Browsing by Title

Now showing items 1949-1968 of 7544

Fabrication and characterization of bulk nanostructured materials of steel and aluminum alloys by air blast shot peening

Waikar, Rahul (University of Alabama Libraries, 2010)

In recent years, bulk nanostructured materials processed by methods of severe plastic deformation (SPD) have attracted the growing interest in academia and industry. This interest is caused not only by unique physical and ...
Fabrication and characterization of graded magnetocrystalline anisotropy iron-nickel-platinum alloy thin films

Fu, Bianzhu (University of Alabama Libraries, 2011)

The further increase of magnetic storage density is limited by superparamagnetism: the size of the magnetic grains has reached a scale (several nanometers) at which thermal fluctuations can erase the stored information. ...
Fabrication and ferromagnetic resonance study of epitaxial spinel ferrite films for microwave device applications

Pachauri, Neha (University of Alabama Libraries, 2014)

Single crystalline nickel ferrite and lithium ferrite thin films have attracted a lot of research attention recently, because of their unique physical properties for practical applications in next generation technologies, ...
Fabrication and properties of nanoscale multiferroic heterostructures for application in Magnetoelectric Random Access Memory (MeRAM) devices

Kim, Gunwoo (University of Alabama Libraries, 2012)

Magnetoelectric random access memory (MERAM) has emerged as a promising new class of non-volatile solid-state memory device. It offers nondestructive reading along with low power consumption during the write operation. A ...
Fabrication and reliability testing of copper-filled through-silicon vias for three-dimensional chip stacking applications

Kamto Tegueu, Alphonse Marie (University of Alabama Libraries, 2010)

Through-silicon vias (TSVs) have been extensively studied because of their ability to achieve chip stacking for enhanced system performance. The fabrication process is becoming somewhat mature. However, reliability issues ...
Fabrication of Carbon Nanotube filled blind vias and the investigation of Carbon Nanotubes embedded in a copper matrix for three-dimensional chip stacking applications

Jordan, Matthew Braxton (University of Alabama Libraries, 2013)

Through silicon vias (TSVs) have been studied extensively because of their ability to increase the performance of electronic systems. Ultimately the performance of the TSVs depends on the materials used to fill them. Current ...
Fabrication of pure starch fibers by electrospinning

Kong, Lingyan; Ziegler, Gregory R. (2014-05)

Many efforts to spin starch fibers are reported in the patent and research literature. All reported spinning methods are dependent upon addition of non-starch components, e.g. other polymers, plasticizers or cross-linkers. ...
Fabrication of κ-carrageenan fibers by wet spinning: Addition of ι-carrageenan

Kong, Lingyan; Ziegler, Gregory R. (2013-01)

Taking advantage of the gelation process of κ-carrageenan, we have developed a wet-spinning process to fabricate micro-scale fibers from κ-carrageenan. Effects of three important spinning parameters, i.e. coagulation bath ...
Fabrication of κ-Carrageenan Fibers by Wet Spinning: Spinning Parameters

Kong, Lingyan; Ziegler, Gregory R. (2011-10-11)

This study demonstrates the fabrication of κ-carrageenan fibers by a wet-spinning method and discusses three important spinning parameters: coagulation bath composition, spinning rate and post-spinning mechanical drawing. ...
Fabrication, characterization, and tribological performance of micro dent arrays produced by laser shock peening on Ti-6Al-4V alloy

Caslaru, Roberto (University of Alabama Libraries, 2010)

Ti-6AL-4V is a widely used structural material in aerospace, biomedical, and power generation industries due to its low density, good corrosion resistance and high strength properties. However, Ti-6Al-4V is not a suitable ...
Facilitating operator interaction with quality of surveillance multi-robot systems

Dawson, Shameka (University of Alabama Libraries, 2012)

Robotic systems are becoming more practical in military applications. In fact, unmanned aerial vehicles (UAVs) are being used for surveillance and reconnaissance missions. Using UAVs for surveying a region of interest can ...
Facilitators' perceptions of facilitation in the problem-based learning mathematics classroom

Ingram, Shelia McGee (University of Alabama Libraries, 2013)

Despite the significant amount of research on problem-based learning (PBL) in medical education and gifted education, there is only a scarce amount of research on this instructional approach in secondary mathematics ...
Facility dogs and child life: synthesizing psychosocial therapies

Goldstein, Emily Beth (University of Alabama Libraries, 2021)

Animal-assisted therapy (AAT) is used to promote coping in stressful situations by allowing a recipient to experience a therapeutic interaction with a trained therapy animal, usually a dog. One type of therapy dog, known ...
Factor analysis of lateralized auditory perceptual resources

Greenlee, Eric T. (University of Alabama Libraries, 2015)

The primary goal of this study was to identify independent, hemispherically lateralized auditory perceptual resources so that they could be used to expand the Multiple Resources Questionnaire (MRQ), an existing measure ...
Factors contributing to teacher retention in Georgia

Locklear, Tina M. (University of Alabama Libraries, 2010)

The purpose of this mixed method, survey-based inquiry was to determine how Georgia public high school faculty members perceive various pressures and experiences associated with a career in education. These perceptions ...
Factors in the History of Tuscaloosa, Alabama, 1816-1846

Boucher, Morris Raymond (University of Alabama Libraries, )

The history of Tuscaloosa as a town goes back beyond the history of the state of which it forms a part. From a purely technical standpoint, it became an incorporated town one day earlier than Alabama became a state. ...
Factors influencing inland property damage from Gulf of Mexico tropical cyclones

Rifat, Shaikh Abdullah Al (University of Alabama Libraries, 2017)

Landfalling tropical cyclones (TC) in the USA cost 5-10 billion dollars annually. Tropical cyclone related losses can be influenced by the characteristics of a tropical cyclone itself as well as the levels of social ...
Factors influencing occupational commitment among students pursuing careers in journalism

Vernon, Emily (University of Alabama Libraries, 2011)

This study evaluated factors that influenced students' decisions to pursue a journalism career and their commitment to the field. Students from two Alabama universities were surveyed. A quantitative analysis was used to ...
Factors influencing students' satisfaction and experiences in high school online courses: a multiple case study

Harbison, Amber Nicole (University of Alabama Libraries, 2011)

The high school classroom setting is transitioning to meet the needs of the 21st century learner. Advancements in technology, such as the Internet and software platforms for web-based learning, have led to an increase in ...
Factors influencing the distribution of soil Streptomyces spp. and determination of species capable of producing a neurodegenerative metabolite

Watkins, Anna Leigh (University of Alabama Libraries, 2013)

The distribution of the common soil bacteria, Streptomyces, is believed to be influenced by soil characteristics. Studies have indicated that soil properties can be influenced by land use, suggesting different communities ...

Now showing items 1949-1968 of 7544

Search DSpace

Browse

All of Institutional Repository

My Account

If you find content within the University of Alabama’s Institutional Repository that you believe infringes your copyright or otherwise violates the law, let us know, and we’ll carefully review the material and take appropriate action. You can send notification to security@ua.edu. Copyright notifications must comply with the requirements of Section 512(C)(3) of the Digital Millennium Copyright Act. Note that only the copyright owner or an authorized representative of the copyright owner can file a DMCA Infringement Notice on his/her behalf.

For more information, please see The University of Alabama copyright statement.

Browsing by Title

Browsing by Title

Search DSpace

Browse

All of Institutional Repository

My Account