Theses and Dissertations - Department of Chemistry & Biochemistry

Permanent URI for this collection

https://ir.ua.edu/handle/123456789/88

Browse

Browsing Theses and Dissertations - Department of Chemistry & Biochemistry by Subject "Engineering"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Computational studies of solid state materials for practical applications
    (University of Alabama Libraries, 2012) Stott, Amanda C.; Dixon, David A.; University of Alabama Tuscaloosa
    The Ni-rich Ni55Ti45 composition of the NiTi alloy is a promising material for aerospace bearing materials. Spiral orbit tribometry friction tests performed on Ni-rich Ni55Ti45 titanium ball bearings indicate that this alloy is a promising candidate for future aerospace bearing applications. Microstructural characterization of the bearing specimens was performed using transmission electron microscopy and energy dispersive spectroscopy, with NiTi, Ni4Ti3, Ni3Ti, and Ni2Ti4Ox phases identified within the microstructure of the alloy. Density functional theory (DFT) was applied to predict the electronic structure of the NixTiy phases, including the band structure and site projected density of states. Ultraviolet photoemission spectroscopy was used to verify the density of states results from the density functional theory calculations, with good agreement observed between experiment and theory. Plane wave ab initio DFT calculations of the B2 NiTi (100), (110), and (111) surfaces, the B2 and B19´ phases of NiTi, and the supercell structures of NiTi, Ni4Ti3 and Ni3Ti are also reported. Electronic energies from the electronic structure calculations are used to assess relative stability of the different surface and supercell geometries. DFT was applied using a plane wave approach for solids to determine the band gap energies in a series of Pb3C6X6 semiconducting extended-network organic structures, to determine the phase stability in the NiTi alloy system, and to study the surface of the (bcc) B2 phase of NiTi. To reveal the molecular structure and optoelectronic properties of these materials, a detailed ab-initio theoretical investigation of the solid-state properties was performed. Density functional theory was applied to predict the electronic structure of the NixTiy phases, including the band structure and site projected density of states. Organo-metallic compounds are also an important class of materials for organic electronic devices due to their semiconducting properties. Ground state geometries, band structure, density of states, and charge density were calculated using density functional theory using the PBE exchange-correlation functional as well as the Heyd-Scuseria-Ernzerhof (HSE06) hybrid functional. The results show that the optical properties and band gap energies can be easily tuned by chemical modifications of the substituent X atom in Pb3(C6X6). Calculations of substituent atoms S, O, Se, and Te are presented. TiV-based alloys are promising candidates for NiMH batteries, as it is well established that the V-based (bcc) solid solution phase acts as the major hydrogen absorbing phase wguke the (hcp) Ti phase acts mainly as a catalyst for electrochemical hydrogenation and dehydrogenation. To achieve improved electrochemical performance a precise knowledge of the microstructure is required. Therefore, the influence of the interfacial energy on the material phase stability was investigated for a series of TiV multi-laminate thin films. Experiments revealed that at a higher layer thickness, the α (hcp) phase is the most stable. As the layer thickness is reduced, a transformation from the α (hcp) phase to the ß (bcc) phase occurs. Atomic-scale characterization of the transformed specimen by atom probe tomography reveals V interfacial diffusion between the layers. Equivalent crystal theory based calculations confirm the V interfacial diffusion mechanism. The predicted segregation profiles match those obtained experimentally.
  • Thumbnail Image
    Item
    Spectroelectrochemistry studies of perovskite electrode materials
    (University of Alabama Libraries, 2021) Yadav, Jeetika; Pan, Shanlin; University of Alabama Tuscaloosa
    Perovskite materials have interesting optoelectronic properties such as tunable bandgap, high photoluminescence, broad spectral range, and emission tunability in the entire visible region. These materials have been extensively used as an absorber layer in the solar cells however their applications in terms of electrochemiluminescence (ECL) in the lighting industry has not been explored. This dissertation presents a study of the electrochemiluminescence, stability, size-dependent, and luminescent properties of these materials. Chapter 1 of this dissertation provides extensive background and a broad review of current research progress made in the field of perovskite materials and their applications. Chapter 2 illustrates the operation principles of several selected electrochemistry and characterization techniques extensively applied in this doctoral research. The doctoral research work starts with the synthesis and photophysical studies of perovskite films in Chapter 3 to show their fluorescence emission and stability. Confocal fluorescence microscopy is used to study the red and green fluorescence from the perovskite films and the origin and relationship between both colors are described. The synthesized perovskite films are used as a device for light-emitting electrochemical cells (LECs) applications. Since the optoelectronics properties of perovskite materials are greatly dependent on their size and structure, a perovskite size and density gradient are developed on a conductive substrate upon a single potential application as shown in Chapter 4. Dark field scattering (DFS), fluorescence imaging, X-ray crystallography (XRD), and matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) imaging mass spectrometry techniques demonstrate that the large-sized and low-density perovskite crystals are more stable than the smaller sized high-density perovskite crystals. Finally, spectroelectrochemistry and photophysics, stability of perovskite quantum dots are described in Chapter 5. The generated ECL of perovskite quantum dots studied by was stabilized by incorporated the perovskite quantum dots in polystyrene (PS) polymer matrix increasing the efficiency of ECL generation 2.5 folds. Challenges of this doctoral work and future perspectives are described in Chapter 6.